source to en_US translation catalogue (331 entries)

[ctx: GLWidget]
source: 单段
en_US: Single segment

[ctx: GLWidget]
source: 启动
en_US: Start

[ctx: GLWidget]
source: 复位
en_US: Reset

[ctx: GLWidget]
source: 急停
en_US: ESTOP

[ctx: GLWidget]
source: 探测
en_US: Detection

[ctx: GLWidget]
source: 暂停
en_US: Pause

[ctx: GLWidget]
source: 端子信号: 限位[
en_US: Terminal signal:Limit[

[ctx: GLWidget]
source: 选择停
en_US: Select stop

[ctx: QObject]
source: 下载
en_US: Download

[ctx: QObject]
source: 下载失败
en_US: Download Failed

[ctx: QObject]
source: 下载成功
en_US: Download Successful

[ctx: QObject]
source: 取消
en_US: Cancel

[ctx: QObject]
source: 无法创建文件: %1
en_US: Cannot create file: %1

[ctx: QObject]
source: 确认
en_US: Confirm

[ctx: QObject]
source: 速度：%1
en_US: Speed: %1

[ctx: QObject]
source: 速度：等待中...
en_US: Speed: Waiting...

[ctx: QObject]
source: 错误: %1
en_US: Error: %1

[ctx: ShutdownRebootDialog]
source: 关机
en_US: Shutdown

[ctx: ShutdownRebootDialog]
source: 剩余时间: %1 秒
en_US: Remaining time: %1 seconds

[ctx: ShutdownRebootDialog]
source: 取消
en_US: Cancel

[ctx: ShutdownRebootDialog]
source: 立即%1
en_US: Immediately %1

[ctx: ShutdownRebootDialog]
source: 请再次确认是否%1，剩余 %2 秒后将自动确认%1
en_US: Please confirm again whether %1, it will automatically confirm %1 after the remaining %2 seconds

[ctx: ShutdownRebootDialog]
source: 重启
en_US: Restart

[ctx: frmMain]
source:     信号强度:
en_US:     Signal strength:

[ctx: frmMain]
source: %1 个客户端
en_US: %1 Client(s)

[ctx: frmMain]
source: %1 字节
en_US: %1 Byte

[ctx: frmMain]
source: 0 个客户端
en_US: 0 Clients

[ctx: frmMain]
source: 1.移动刀具至工件的一侧, 按 <记录X> ,软件将记录下当前点的机械坐标;
    2.移动刀具至工件的另一侧,按 <分中X> ,软件会根据当前位置坐标和第一步的记录值计算出中点坐标,并设置为工件原点。
en_US: 1. Move the tool to one side of the workpiece, press <Record X>, and the software will record the mechanical coordinates of the current point;
    2. Move the tool to the other side of the workpiece, press <Center X>, and the software will calculate the center point coordinates based on the current position and the recorded value from the first step, and set it as the workpiece origin

[ctx: frmMain]
source: 2、分中模式:
en_US: 2. Centering Mode:

[ctx: frmMain]
source: 3D刀路仿真颜色设置
en_US: 3D toolpath color settings

[ctx: frmMain]
source: 3轴
en_US: 3 axes

[ctx: frmMain]
source: 4轴
en_US: 4 axes

[ctx: frmMain]
source: 5轴
en_US: 5 axes

[ctx: frmMain]
source: CPU温度:
en_US: CPU Temperature:

[ctx: frmMain]
source: G73退刀距离:
en_US: G73 retract distance:

[ctx: frmMain]
source: G92偏移掉电保存:
en_US: Save G92 offsets on power off:

[ctx: frmMain]
source: G代码遇到错误停止加工:
en_US: Stop machining on G-code error:

[ctx: frmMain]
source: IP地址:
en_US: IP Address:

[ctx: frmMain]
source: MAC地址:
en_US: MAC Address:

[ctx: frmMain]
source: PushButton
en_US: Push Button

[ctx: frmMain]
source: SSH服务:
en_US: SSH Service:

[ctx: frmMain]
source: SSH连接状态
en_US: SSH Connection Status

[ctx: frmMain]
source: U盘
en_US: U disk

[ctx: frmMain]
source: WIFI列表:
en_US: WIFI list:

[ctx: frmMain]
source: WIFI密码
en_US: password

[ctx: frmMain]
source: WIFI状态
en_US: WIFI status

[ctx: frmMain]
source: WIFI状态:
en_US: WIFI status:

[ctx: frmMain]
source: kon空的页面
en_US: Empty Page

[ctx: frmMain]
source: 上传日志
en_US: Upload Logs

[ctx: frmMain]
source: 上传系统设置
en_US: Upload settings

[ctx: frmMain]
source: 两点分中
en_US: Two-point centering

[ctx: frmMain]
source: 串口设备列表:
en_US: Serial Port Device List:

[ctx: frmMain]
source: 主轴PWM频率:
en_US: PWM frequency:

[ctx: frmMain]
source: 主轴与其他参数配置
en_US: Spindle and other configurations

[ctx: frmMain]
source: 主轴倍率:
en_US: Spindle Override:

[ctx: frmMain]
source: 主轴停止
en_US: Spindle Stop

[ctx: frmMain]
source: 主轴停止延迟:
en_US: Spindle Stop Delay:

[ctx: frmMain]
source: 主轴反转
en_US: Spindle CCW

[ctx: frmMain]
source: 主轴启动延迟:
en_US: Spindle Start Delay:

[ctx: frmMain]
source: 主轴最大转速:
en_US: Spindle Max Speed:

[ctx: frmMain]
source: 主轴最小转速:
en_US: Spindle Min Speed:

[ctx: frmMain]
source: 主轴正转
en_US: Spindle CW

[ctx: frmMain]
source: 主页
en_US: Home

[ctx: frmMain]
source: 主页坐标显示轴数:
en_US: Display axis:

[ctx: frmMain]
source: 二次探测速度:
en_US: Secondary probing speed:

[ctx: frmMain]
source: 云端版本编译日期:
en_US: Cloud Version Build Date:

[ctx: frmMain]
source: 以太网
en_US: Ethernet

[ctx: frmMain]
source: 传输状态:
en_US: Transfer Status:

[ctx: frmMain]
source: 你的加工文件大于4mb,本次将不会进行开机自动加载此加工文件:
en_US: Your machining file is larger than 4MB. It will not be automatically loaded at startup:

[ctx: frmMain]
source: 你的加工文件过大,可能会导致系统卡顿,本次将不会进行3D刀路仿真
en_US: Your machining file is too large, which may cause system lag. 3D toolpath simulation will not be performed this time

[ctx: frmMain]
source: 你的加工文件过大,可能会导致系统卡顿,本次将采用大文件加工模式，支持GB以上的文件,点击确认即可开始加工
en_US: Your machining file is too large, which may cause system lag. This time, a large file machining mode will be used, supporting files larger than GB. Click confirm to start machining

[ctx: frmMain]
source: 保存
en_US: Save

[ctx: frmMain]
source: 保存设置
en_US: Save

[ctx: frmMain]
source: 修改时间
en_US: Modified Time

[ctx: frmMain]
source: 偏移
en_US: Offsets

[ctx: frmMain]
source: 停止
en_US: Stop

[ctx: frmMain]
source: 全部回零
en_US: Home all axes

[ctx: frmMain]
source: 全部清零
en_US: Clear all

[ctx: frmMain]
source: 六位密码:
en_US: Six-digit password:

[ctx: frmMain]
source: 关机
en_US: Shutdown

[ctx: frmMain]
source: 关闭3D刀路仿真
en_US: Disable 3D toolpath simulation

[ctx: frmMain]
source: 冷却液关闭延迟:
en_US: Coolant Off Delay:

[ctx: frmMain]
source: 刀具
en_US: Tools

[ctx: frmMain]
source: 刀具号
en_US: Tool

[ctx: frmMain]
source: 刀具号:
en_US: Tool:

[ctx: frmMain]
source: 分中X
en_US: X centering

[ctx: frmMain]
source: 分中Y
en_US: Y centering

[ctx: frmMain]
source: 分中主轴转速
en_US: Centering Spindle Speed

[ctx: frmMain]
source: 列:
en_US: Column:

[ctx: frmMain]
source: 删除
en_US: Remove

[ctx: frmMain]
source: 刷新
en_US: Refresh

[ctx: frmMain]
source: 剩余:
en_US: Remaining:

[ctx: frmMain]
source: 剪切
en_US: Cut

[ctx: frmMain]
source: 功能:
en_US: Function:

[ctx: frmMain]
source: 加工已完成,用时
en_US: Machining completed, time taken

[ctx: frmMain]
source: 加工文件名.nc
en_US: Processing filename.nc

[ctx: frmMain]
source: 加速度:
en_US: Acceleration:

[ctx: frmMain]
source: 半径补偿:
en_US: Diameter:

[ctx: frmMain]
source: 单段
en_US: Single segment

[ctx: frmMain]
source: 卸载
en_US: Unmount

[ctx: frmMain]
source: 厂商设置
en_US: Factory Settings

[ctx: frmMain]
source: 压缩包文件不存在！
en_US: Archive file does not exist!

[ctx: frmMain]
source: 反转归位轴方向:
en_US: Homing direction invert:

[ctx: frmMain]
source: 反转行进方向
en_US: direction invert

[ctx: frmMain]
source: 取消
en_US: Cancel

[ctx: frmMain]
source: 后退
en_US: Backward

[ctx: frmMain]
source: 启动
en_US: Start

[ctx: frmMain]
source: 启动分中棒
en_US: Engage the Center Finder

[ctx: frmMain]
source: 启用
en_US: Enable

[ctx: frmMain]
source: 启用 (重启生效)
en_US: Enable (effective after restart)

[ctx: frmMain]
source: 启用屏幕软键盘:
en_US: Enable soft keyboard:

[ctx: frmMain]
source: 启用循环运行
en_US: Enable Cycle Operation

[ctx: frmMain]
source: 启用硬限位
en_US: Enable hard limits

[ctx: frmMain]
source: 回安全点Z命令:
en_US: Safe Z Command:

[ctx: frmMain]
source: 回工件点
en_US: GOTO Zero

[ctx: frmMain]
source: 回工件点Z安全距离:
en_US: Return to workpiece point Z safe distance:

[ctx: frmMain]
source: 回零A
en_US: Homing A

[ctx: frmMain]
source: 回零B
en_US: Home B

[ctx: frmMain]
source: 回零C
en_US: Home C

[ctx: frmMain]
source: 回零X
en_US: Homing X

[ctx: frmMain]
source: 回零Y
en_US: Homing Y

[ctx: frmMain]
source: 回零Z
en_US: Homing Z

[ctx: frmMain]
source: 固件下载失败，请检查网络连接！
en_US: Firmware download failed, please check network connection!

[ctx: frmMain]
source: 固件文件损坏，请重新下载！
en_US: Firmware file corrupted, please re-download!

[ctx: frmMain]
source: 圆弧公差:
en_US: Arc Tolerance:

[ctx: frmMain]
source: 在线更新固件
en_US: Online Firmware Update

[ctx: frmMain]
source: 在线系统更新
en_US: Online System Update

[ctx: frmMain]
source: 坐标系
en_US: Offset

[ctx: frmMain]
source: 坐标系:
en_US: Offset:

[ctx: frmMain]
source: 复位
en_US: Reset

[ctx: frmMain]
source: 复制
en_US: Copy

[ctx: frmMain]
source: 复制系统程序文件失败，请重试。
en_US: System program file copy failed, please retry.

[ctx: frmMain]
source: 复制英文语言文件失败，请重试。
en_US: English language file copy failed, please retry.

[ctx: frmMain]
source: 好
en_US: OK

[ctx: frmMain]
source: 安全Z
en_US: SAFE Z

[ctx: frmMain]
source: 定位行
en_US: Go to Line

[ctx: frmMain]
source: 对刀信号:
en_US: Tool Setting Signal:

[ctx: frmMain]
source: 对刀板高度:
en_US: Tool setting plate height:

[ctx: frmMain]
source: 对已归零轴应用软限制到机器工作空间
en_US: Apply Soft Limits to Machine Workspace for Homed Axes

[ctx: frmMain]
source: 导入系统设置
en_US: Import settings

[ctx: frmMain]
source: 导出日志
en_US: Export Logs

[ctx: frmMain]
source: 屏幕亮度:
en_US: Screen Brightness:

[ctx: frmMain]
source: 屏幕截图功能已开启,10秒后将截图
en_US: The screenshot function is enabled and will capture the screen in 10 seconds

[ctx: frmMain]
source: 屏幕截图完成,已保存至你的U盘,文件名为
en_US: The screenshot is complete and has been saved to your USB drive, with the file name as

[ctx: frmMain]
source: 屏幕虚拟按钮
en_US: Screen virtual button

[ctx: frmMain]
source: 工件偏置
en_US: Workpiece bias

[ctx: frmMain]
source: 工件坐标
en_US: Work co.

[ctx: frmMain]
source: 工作模式:
en_US: Operating mode:

[ctx: frmMain]
source: 已使用:
en_US: Used:

[ctx: frmMain]
source: 已经到根目录了,不可以再后退了
en_US: You are already at the root directory, you cannot go back any further

[ctx: frmMain]
source: 已连接
en_US: Connected

[ctx: frmMain]
source: 已连接:
en_US: Connected:

[ctx: frmMain]
source: 常开
en_US: Normally Open

[ctx: frmMain]
source: 常闭
en_US: Normally Closed

[ctx: frmMain]
source: 开始升级
en_US: Start Update

[ctx: frmMain]
source: 开始对刀
en_US: Start tool setting

[ctx: frmMain]
source: 开始屏幕截图
en_US: Start taking a screenshot

[ctx: frmMain]
source: 开机和复位后设置主轴转速:
en_US: Default spindle RPM at power-on

[ctx: frmMain]
source: 开机强制归位
en_US: Homing on startup

[ctx: frmMain]
source: 开机次数:
en_US: Number of Starts:

[ctx: frmMain]
source: 开机自动载入上次选择的加工文件
en_US: Automatically load the last selected machining file on startup

[ctx: frmMain]
source: 归位去抖时间:
en_US: Homing debounce time:

[ctx: frmMain]
source: 归位参数配置
en_US: Homing configuration

[ctx: frmMain]
source: 归位顺序轴:
en_US: Homing sequence axis:

[ctx: frmMain]
source: 当前路径:
en_US: Current path:

[ctx: frmMain]
source: 当前连接:
en_US: Current Connections:

[ctx: frmMain]
source: 循环次数:
en_US: Cycle Count:

[ctx: frmMain]
source: 微秒
en_US: us

[ctx: frmMain]
source: 快速倍率:
en_US: Rapid Override:

[ctx: frmMain]
source: 急停信号:
en_US: Emergency Stop Signal:

[ctx: frmMain]
source: 总容量:
en_US: Total capacity:

[ctx: frmMain]
source: 恢复出厂设置
en_US: Restore factory settings

[ctx: frmMain]
source: 恢复时恢复状态
en_US: Restore State on Resume

[ctx: frmMain]
source: 恢复默认3D仿真颜色
en_US: Restore default 3D simulation colors

[ctx: frmMain]
source: 恢复默认参数
en_US: Restore Default Parameters

[ctx: frmMain]
source: 您确定要删除选中的项目吗？
en_US: Are you sure you want to delete the selected items?

[ctx: frmMain]
source: 您选中的项目为文件夹,如需进入文件夹请双击
en_US: The item you selected is a folder. Please double-click to enter the folder

[ctx: frmMain]
source: 手动
en_US: Jog

[ctx: frmMain]
source: 打印状态
en_US: Print Status

[ctx: frmMain]
source: 打开写入文件失败!!
en_US: Failed to open file for writing!!

[ctx: frmMain]
source: 打开读入文件失败!!
en_US: Failed to open file for reading!!

[ctx: frmMain]
source: 扫描
en_US: Scan

[ctx: frmMain]
source: 拉开限位开关距离:
en_US: pull-off distance:

[ctx: frmMain]
source: 拐角公差:
en_US: Corner Tolerance:

[ctx: frmMain]
source: 按钮自定义名字与功能
en_US: Custom button names and functions

[ctx: frmMain]
source: 探测
en_US: Probe

[ctx: frmMain]
source: 探测失败,原因请查看系统消息
en_US: Probing failed, please check system messages for the reason

[ctx: frmMain]
source: 探测成功,请点击写入
en_US: Probing successful, please click to write

[ctx: frmMain]
source: 探测控制:
en_US: Probe Control:

[ctx: frmMain]
source: 探测过程中的进给速度覆盖
en_US: Feed Rate Override During Probing

[ctx: frmMain]
source: 接近限位开关速度:
en_US: locate feed rate:

[ctx: frmMain]
source: 控制面板
en_US: control Panel

[ctx: frmMain]
source: 控制面板按钮按下后自动关闭页面
en_US: The control panel button automatically closes the page after being pressed

[ctx: frmMain]
source: 搜寻限位开关速度:
en_US: search seek rate:

[ctx: frmMain]
source: 撤销
en_US: Undo

[ctx: frmMain]
source: 文件
en_US: File

[ctx: frmMain]
source: 文件 Start_LOGO.bmp 不存在
en_US: The file Start_LOGO.bmp does not exist

[ctx: frmMain]
source: 文件不存在
en_US: File does not exist

[ctx: frmMain]
source: 文件名
en_US: Filename

[ctx: frmMain]
source: 文件大小
en_US: File size

[ctx: frmMain]
source: 文件夹
en_US: Folder

[ctx: frmMain]
source: 文件拷贝失败,未知原因
en_US: File copy failed for an unknown reason

[ctx: frmMain]
source: 断开连接
en_US: Disconnected

[ctx: frmMain]
source: 新建
en_US: New

[ctx: frmMain]
source: 旋转轴快速环绕:
en_US: Rotary Axis Fast Wraparound:

[ctx: frmMain]
source: 无法打开文件:
en_US: Unable to open file:\n

[ctx: frmMain]
source: 无法检测到UF2设备或找到挂载点，请重试。
en_US: Unable to detect UF2 device or find mount point, please retry.

[ctx: frmMain]
source: 无法进入该文件夹，文件夹不存在。
en_US: Unable to access the folder; the folder does not exist.

[ctx: frmMain]
source: 时区:
en_US: Time Zone:

[ctx: frmMain]
source: 时间设置
en_US: Time Settings

[ctx: frmMain]
source: 暂停
en_US: Pause

[ctx: frmMain]
source: 暂停信号:
en_US: Pause Signal:

[ctx: frmMain]
source: 暂停时操作设置:
en_US: Pause Operation Settings:

[ctx: frmMain]
source: 暂停期间禁用激光
en_US: Disable Laser During Pause

[ctx: frmMain]
source: 替换
en_US: Replace

[ctx: frmMain]
source: 最大行程:
en_US: Maximum travel:

[ctx: frmMain]
source: 最大进给速度:
en_US: Maximum feed rate:

[ctx: frmMain]
source: 有连接
en_US: Connected

[ctx: frmMain]
source: 未找到固件文件！请检查压缩包内容。
en_US: Firmware file not found! Please check archive content.

[ctx: frmMain]
source: 未检测到U盘
en_US: USB drive not detected

[ctx: frmMain]
source: 未运行
en_US: Not Running

[ctx: frmMain]
source: 未连接
en_US: Not connected

[ctx: frmMain]
source: 本地更新固件
en_US: Local Firmware Update

[ctx: frmMain]
source: 本地系统更新
en_US: Local System Update

[ctx: frmMain]
source: 本机
en_US: Local

[ctx: frmMain]
source: 机器码:
en_US: Machine code:

[ctx: frmMain]
source: 机械坐标
en_US: Machine co.

[ctx: frmMain]
source: 查找
en_US: Find

[ctx: frmMain]
source: 检查到有新版本，是否进行系统版本升级?
en_US: New version detected, proceed with system version update?

[ctx: frmMain]
source: 正在下载固件...
en_US: Downloading firmware...

[ctx: frmMain]
source: 正在下载最新的系统程序文件
en_US: Downloading latest system program files

[ctx: frmMain]
source: 正在下载英文语言文件
en_US: Downloading English language file

[ctx: frmMain]
source: 正在写入固件...
en_US: Writing firmware...

[ctx: frmMain]
source: 正在加载加工文件...
en_US: Loading machining file...

[ctx: frmMain]
source: 正在等待设备进入升级模式，请稍候...
en_US: Waiting for device to enter update mode, please wait...

[ctx: frmMain]
source: 正在解压固件文件...
en_US: Extracting firmware file...

[ctx: frmMain]
source: 正在解压系统程序文件...
en_US: Extracting system program files...

[ctx: frmMain]
source: 正在连接...
en_US: Connecting...

[ctx: frmMain]
source: 正常
en_US: Normal

[ctx: frmMain]
source: 步距:
en_US: Step:

[ctx: frmMain]
source: 毫秒
en_US: ms

[ctx: frmMain]
source: 注:各轴限位开关的类型,不勾选为NC常闭,勾选为常开NO
en_US: Note: The type of limit switch for each axis, unchecked means NC, checked means NO.

[ctx: frmMain]
source: 清零
en_US: Zero

[ctx: frmMain]
source: 激光模式
en_US: Laser Mode

[ctx: frmMain]
source: 点动软限制:
en_US: Jog Soft Limits:

[ctx: frmMain]
source: 硬盘信息:
en_US: Hard Drive Info:

[ctx: frmMain]
source: 确认
en_US: Confirm

[ctx: frmMain]
source: 秒
en_US: S

[ctx: frmMain]
source: 程序检查模式
en_US: Program check mode

[ctx: frmMain]
source: 稍后重启
en_US: Restart Later

[ctx: frmMain]
source: 空闲
en_US: Idle

[ctx: frmMain]
source: 立即重启
en_US: Restart Now

[ctx: frmMain]
source: 端子实体按钮
en_US: Terminal physical button

[ctx: frmMain]
source: 第1次归位:
en_US: First homing:

[ctx: frmMain]
source: 第2次归位:
en_US: Second homing:

[ctx: frmMain]
source: 第3次归位:
en_US: Third homing:

[ctx: frmMain]
source: 第4次归位:
en_US: Fourth homing:

[ctx: frmMain]
source: 第5次归位:
en_US: Fifth homing:

[ctx: frmMain]
source: 粘贴
en_US: Paste

[ctx: frmMain]
source: 系统升级已完成，需要重启程序使更新生效。是否立即重启程序？
en_US: System upgrade completed, program restart required for updates to take effect. Restart program now?

[ctx: frmMain]
source: 系统提示
en_US: System prompt

[ctx: frmMain]
source: 系统消息:
en_US: System message:

[ctx: frmMain]
source: 系统程序文件下载失败，请检查网络连接后重试。
en_US: System program file download failed, please check network connection and retry.

[ctx: frmMain]
source: 系统程序文件解压失败，请重试。
en_US: System program file extraction failed, please retry.

[ctx: frmMain]
source: 系统编译日期:
en_US: System compile time:

[ctx: frmMain]
source: 系统自动检查升级:检查云端版本与本地版本一致,不需要系统升级
en_US: System Auto Check Update: Cloud version matches local version, no system update required

[ctx: frmMain]
source: 结束系统运行
en_US: Shut down the system

[ctx: frmMain]
source: 编辑
en_US: Edit

[ctx: frmMain]
source: 编辑:
en_US: Edit:

[ctx: frmMain]
source: 网关地址:
en_US: Gateway Address:

[ctx: frmMain]
source: 网络状态
en_US: Network Status

[ctx: frmMain]
source: 网络状态:
en_US: Network Status:

[ctx: frmMain]
source: 脉冲时间:
en_US: Pulse duration:

[ctx: frmMain]
source: 自动检测最新版本并询问我升级
en_US: Automatically check for the latest version and prompt me to upgrade

[ctx: frmMain]
source: 自定义G代码
en_US: Custom G-code

[ctx: frmMain]
source: 自定义G代码:
en_US: Custom G-code:

[ctx: frmMain]
source: 自定义按钮名字:
en_US: Custom button name:

[ctx: frmMain]
source: 英文语言文件下载失败，请检查网络连接后重试。
en_US: English language file download failed, please check network connection and retry.

[ctx: frmMain]
source: 获取当前位置
en_US: Get current position

[ctx: frmMain]
source: 行:
en_US: Line:

[ctx: frmMain]
source: 要加工的G代码有错误:
en_US: There is an error in the G-code to be machined:

[ctx: frmMain]
source: 解压过程超时，请重试！
en_US: Extraction process timed out, please retry!

[ctx: frmMain]
source: 记录X
en_US: Record X

[ctx: frmMain]
source: 记录Y
en_US: Record Y

[ctx: frmMain]
source: 设定
en_US: Set

[ctx: frmMain]
source: 设定全部
en_US: Set all

[ctx: frmMain]
source: 设置
en_US: Settings

[ctx: frmMain]
source: 设置为旋转轴
en_US: Set this axis as a rotary axis

[ctx: frmMain]
source: 设置开机图片
en_US: Set boot image

[ctx: frmMain]
source: 请先选中一个文件进行载入。
en_US: Please select a file to load first.

[ctx: frmMain]
source: 走1毫米所需脉冲数:
en_US: Axis travel resolution:

[ctx: frmMain]
source: 车床模式
en_US: Lathe Mode

[ctx: frmMain]
source: 轴:
en_US: Axis:

[ctx: frmMain]
source: 轴参数配置
en_US: Axis configuration

[ctx: frmMain]
source: 载入
en_US: Load

[ctx: frmMain]
source: 运动控制器参数设置:
en_US: Motion controller parameter settings:

[ctx: frmMain]
source: 运动控制器编译日期:
en_US: Motion Controller Build Date:

[ctx: frmMain]
source: 运行中 (端口:%1)
en_US: Running (Port: %1)

[ctx: frmMain]
source: 运行中 (端口:22)
en_US: Running (Port: 22)

[ctx: frmMain]
source: 这是一个较为常用的G92 Z清零对刀
    一般使用对刀块放在工件表面,
    使用G38.2命令完成探测,点击对刀后Z轴朝下运动,
    直到接触到对刀块后停止完成对刀,然后Z轴再退回
    一定距离方便用户进行其他操作,
en_US: This is a commonly used G92 Z zeroing tool setting procedure. Typically, the tool setter block is placed on the workpiece surface. The G38.2 command is used to complete the probing. After clicking the tool setting button, the Z axis moves downward until it contacts the tool setter block and stops, completing the tool setting. Then, the Z axis retracts a certain distance to facilitate other operations for the user,

[ctx: frmMain]
source: 进入设置需要密码
en_US: Password is required to enter settings

[ctx: frmMain]
source: 进给倍率:
en_US: Feed Override:

[ctx: frmMain]
source: 连接
en_US: Connect

[ctx: frmMain]
source: 连续
en_US: Continuous

[ctx: frmMain]
source: 退回高度:
en_US: Retract height:

[ctx: frmMain]
source: 选择一个按钮配置:
en_US: Select a button configuration:

[ctx: frmMain]
source: 选择停
en_US: Select stop

[ctx: frmMain]
source: 选择哪里的按钮:
en_US: Select a button location:

[ctx: frmMain]
source: 速度:
en_US: Speed:

[ctx: frmMain]
source: 重启
en_US: Restart

[ctx: frmMain]
source: 重命名
en_US: Rename

[ctx: frmMain]
source: 重复定位次数:
en_US: Homing passes:

[ctx: frmMain]
source: 长度补偿
en_US: Z offset

[ctx: frmMain]
source: 长度补偿:
en_US: Z offset:

[ctx: frmMain]
source: 间隙补偿:
en_US: Backlash compensation:

[ctx: frmMain]
source: 限位常开/常闭:
en_US: Invert limit:

[ctx: frmMain]
source: 首次探测速度:
en_US: Initial probing speed:

[ctx: frmSettings]
source: 3D刀路仿真颜色设置
en_US: 3D toolpath color settings

[ctx: frmSettings]
source: Z 轴运动：
en_US: Z-axis movement:

[ctx: frmSettings]
source: 刀具:
en_US: Tool:

[ctx: frmSettings]
source: 刀具路径
en_US: Tool path

[ctx: frmSettings]
source: 取消
en_US: Cancel

[ctx: frmSettings]
source: 恢复默认值:
en_US: Restore default values:

[ctx: frmSettings]
source: 文本:
en_US: Text:

[ctx: frmSettings]
source: 普通的：
en_US: Ordinary:

[ctx: frmSettings]
source: 画：
en_US: Drawing:

[ctx: frmSettings]
source: 确认
en_US: Confirm

[ctx: frmSettings]
source: 终点：
en_US: Destination:

[ctx: frmSettings]
source: 背景：
en_US: Background:

[ctx: frmSettings]
source: 起点：
en_US: Starting point:

[ctx: frmSettings]
source: 高亮:
en_US: Highlight:
